Note

The Grid Community Toolkit documentation was taken from the Globus Toolkit 6.0 documentation. As a result, there may be inaccuracies and outdated information. Please report any problems to the Grid Community Forums as GitHub issues.

GCTGSI C → GCT 6.0 GSI C Public Interfaces

APIs

Protocol Specifications

GSI Message Specification

The GSSAPI implementation contained in this component produces security tokens that follow an extended version of the SSL/TLS protocol. More information about the protocol can be found here.

GSI Commands

GLOBUS-UPDATE-CERTIFICATE-DIR(8)

NAME

globus-update-certificate-dir - Update symlinks in the trusted CA directory

SYNOPSIS

globus-update-certificate-dir [-help ] [-d DIRECTORY]

Description

The globus-update-certificate-dir program creates symlinks between files (CA certificates, certificate revocation lists, signing policy, and certificate request configuration files) using the certificate hash the installed version of OpenSSL uses. OpenSSL 1.0.0 uses a different name hashing algorithm than previous versions, so CA distributions created with older versions of OpenSSL might not be able to locate trusted CAs and related files. Running globus-update-certificate-dir against a trusted CA directory will add symlinks to the files to the hash if needed.

The full set of command-line options to globus-update-certificate-dir consists of:

-help

Display a help message to standard output and exit

-d DIRECTORY

Create links in the trusted CA directory DIRECTORY instead of using the default search path.

Environment

If the following variables affect the execution of globus-update-certificate-dir

X509_CERT_DIR

Default trusted certificate directory.

HOME

Path to the current user’s home directory.

GLOBUS_LOCATION

Path to the GCT installation.

GRID-CERT-DIAGNOSTICS(1)

NAME

grid-cert-diagnostics - Print diagnostic information about certificates and keys

SYNOPSIS

grid-cert-diagnostics [-h ] | [-help ] [-p ] [-n ] [-c CERTIFICATE]

Description

The grid-cert-diagnostics program displays information about the current user’s security environment, including information about security-related environment variables, security directory search path, personal key and certificates, and trusted certificates. It is intended to provide information to help diagnose problems using GSIC.

By default, grid-cert-diagnostics prints out information regarding the environment and trusted certificate directory. If the -p command-line option is used, then additional information about the current user’s default certificate and key will be printed.

The full set of command-line options to grid-cert-diagnostics consists of:

-h, -help

Display a help message and exit.

-p

Display information about the personal certificate and key that is the current user’s default credential.

-n

Check time synchronization with the ntpdate command.

-c CERTIFICATE, -c -

Check the validity of the certificate in the file named by CERTIFICATE or standard input if the parameter to -c is -.

Examples

In this example, we see the default mode of checking the default security environment for the system, without processing the user’s key and certificate. Note the user receives a warning about a cog.properties and about an expired CA certificate. and about an expired CA certificate.

%  grid-cert-diagnostics

Checking Environment Variables
==============================
Checking if X509_CERT_DIR is set... no
Checking if X509_USER_CERT is set... no
Checking if X509_USER_KEY is set... no
Checking if X509_USER_PROXY is set... no

Checking Security Directories
=======================
Determining trusted cert path... /etc/grid-security/certificates
Checking for cog.properties... found
    WARNING: If the cog.properties file contains security properties,
             Java apps will ignore the security paths described in the GSI
             documentation

Checking trusted certificates...
================================
Getting trusted certificate list...
Checking CA file /etc/grid-security/certificates/1c4f4c48.0... ok
Verifying certificate chain for "/etc/grid-security/certificates/1c3f2ca8.0"... ok
Checking CA file /etc/grid-security/certificates/9d8788eb.0... ok
Verifying certificate chain for "/etc/grid-security/certificates/9d8753eb.0"... failed
    globus_credential: Error verifying credential: Failed to verify credential
    globus_gsi_callback_module: Could not verify credential
    globus_gsi_callback_module: The certificate has expired:
    Credential with subject: /DC=org/DC=example/OU=grid/CN=CA has expired.

In this example, we show a user with a mismatched private key and certificate:

%  grid-cert-diagnostics -p

Checking Environment Variables
==============================
Checking if X509_CERT_DIR is set... no
Checking if X509_USER_CERT is set... no
Checking if X509_USER_KEY is set... no
Checking if X509_USER_PROXY is set... no

Checking Security Directories
=======================
Determining trusted cert path... /etc/grid-security/certificates
Checking for cog.properties... not found

Checking Default Credentials
==============================
Determining certificate and key file names... ok
Certificate Path: "/home/juser/.globus/usercert.pem"
Key Path: "/home/juser/.globus/userkey.pem"
Reading certificate... ok
Reading private key...
ok
Checking Certificate Subject...
"/O=Grid/OU=Example/OU=User/CN=Joe User"
Checking cert... ok
Checking key... ok
Checking that certificate contains an RSA key... ok
Checking that private key is an RSA key... ok
Checking that public and private keys have the same modulus... failed
Private key modulus: D294849E37F048C3B5ACEEF2CCDF97D88B679C361E29D5CB5
219C3E948F3E530CFC609489759E1D751F0ACFF0515A614276A0F4C11A57D92D7165B8
FA64E3140155DE448D45C182F4657DA13EDA288423F5B9D169DFF3822EFD81EB2E6403
CE3CB4CCF96B65284D92592BB1673A18354DA241B9AFD7F494E54F63A93E15DCAE2
Public key modulus : C002C7B329B13BFA87BAF214EACE3DC3D490165ACEB791790
600708C544175D9193C9BAC5AED03B7CB49BB6AE6D29B7E635FAC751E9A6D1CEA98022
6F1B63002902D6623A319E4682E7BFB0968DCE962CF218AAD95FAAD6A0BA5C42AA9AAF
7FDD32B37C6E2B2FF0E311310AA55FFB9EAFDF5B995C7D9EEAD8D5D81F3531E0AE5
Certificate and and private key don't match

GRID-CERT-INFO(1)

NAME

grid-cert-info - Display information about a certificate

SYNOPSIS

grid-cert-info [-help ] [-usage ] [-version ] [-versions ]

Description

The grid-cert-info program displays information contained within a certificate file. By default it shows a text representation of the entire certificate. Specific facts about the certificate can be shown instead by using command-line options. If any of those options are used, then the default display is suppressed. This can be added to the output by using the -all command-line option.

If multiple display options are included on the command-line, the facts related to those will be displayed on separate lines in the order that they occur. If an option is specified multiple time, that fact will be displayed multiple times.

The full set of command-line options to grid-cert-info are:

-help, -usage

Display the command-line options to grid-cert-info and exit.

-version, -versions

Display the version number of the grid-cert-info command. The second form includes more details.

-file CERTIFICATE-FILE

Display information about the first certificate contained in the file named by CERTIFICATE-FILE instead of the default user certificate.

-rfc2253

Display X.509 distinguished names using the string representation defined in RFC 2253 instead of the default OpenSSL oneline format.

-all

Display the text representation of the entire certificate in addition to any other facts requested by command-line options. This is the default if no fact-specific command-line options are used.

-subject, -s

Display the subject name of the X.509 certificate.

-issuer, -i

Display the issuer name of the X.509 certificate.

-issuerhash, -ih

Display the default hash of the issuer name of the X.509 certificate. This can be used to locate which CA certificate in the trusted certificate directory issued the certifcate being inspected.

-startdate, -sd

Display a string representation of the date and time when the certificate is valid from. This is displayed in the format used by the OpenSSL x509 command.

-enddate, -dd

Display a string representation of the date and time when the certificate is valid until. This is displayed in the format used by the OpenSSL x509 command.

Examples

Display the validity times for the default certificate

%  grid-cert-info -sd -ed
Aug 31 12:33:47 2009 GMT
Aug 31 12:33:47 2010 GMT

Display the same information about a different certificate specified on the command-line

%  grid-cert-info -sd -ed -f /etc/grid-security/hostcert.pem
Jan 21 12:24:48 2003 GMT
Jul 15 11:30:57 2020 GMT

Display the subject of a certificate in both the default and the RFC 2253 forms.

%  grid-cert-info -subject
/DC=org/DC=example/DC=grid/CN=Joe User
%  grid-cert-info -subject -rfc2253
CN=Joe User,DC=grid,DC=example,DC=org

Environment Variables

The following environment variables affect the execution of grid-cert-info:

X509_USER_CERT

Path to the default certificate file to inspect.

GRID-CERT-REQUEST(1)

NAME

grid-cert-request - Generate a X.509 certificate request and corresponding private key

SYNOPSIS

grid-cert-request [-help ] [-h ] [-? ] [-usage ]

[-version ] [-versions ]

Description

The grid-cert-request program generates an X.509 Certificate Request and corresponding private key for the specified name, host, or service. It is intended to be used with a CA implemented using the globus_simple_ca package.

The default behavior of grid-cert-request is to generate a certificate request and private key for the user running the command. The subject name is derived from the gecos information in the local system’s password database, unless the -commonname, -cn, or -host command-line options are used.

By default, grid-cert-request writes user certificate requests and keys to the $HOME/.globus directory, and host and service certificate requests and keys to directory, and host and service certificate requests and keys to /etc/grid-security. This can be overridden by using the . This can be overridden by using the -dir command-line option.

The full set of command-line options to grid-cert-request are:

-help, -h, -?, -usage

Display the command-line options to grid-cert-request and exit.

-version, -versions

Display the version number of the grid-cert-request command. The second form includes more details.

-cn NAME, -commonname NAME

Create a certificate request with the common name component of the subject set to NAME. This is used to create user identity certificates.

-dir DIRECTORY

Write the certificate request and key to files in the directory specified by DIRECTORY.

-prefix PREFIX

Use the string PREFIX as the base name of the certificate, certificate_request, and key files instead of the default. For a user certificate request, this would mean creating files $HOME/.globus/PREFIXcert_request.pem, , $HOME/.globus/PREFIXcert.pem, and , and $HOME/.globus/PREFIXkey.pem..

-ca CA-HASH

Use the certificate request configuration for the CA with the name hash CA-HASH instead of the default CA chosen by running grid-default-ca.

-verbose

Keep the output from the OpenSSL certificate request command visible after it completes, instead of clearing the screen..

-interactive, -int

Prompt for each component of the subject name of the request, instead of generating the common name from other command-line options. Note that CAs may not sign certificates for subject names that don’t match their signing policies.

-force

Overwrite any existing certificate request and private key with a new one.

-nopw, -nodes, -nopassphrase

Create an unencrypted private key for the certificate instead of prompting for a passphrase. This is the default behavior for host or service certificates, but not recommended for user certificates.

-host FQDN

Create a certificate request for use on a particular host. This option also causes the private key assoicated with the certificate request to be unencrypted. The FQDN argument to this option should be the fully qualified domain name of the host that will use this certificate. The subject name of the certificate will be derived from the FQDN and the service option if specified by the -service command-line option. If the host for the certificate has multiple names, then use either the -dns or -ip command-line options to add alternate names or addresses to the certificates.

-service SERVICE

Create a certificate request for a particular service on a host. The subject name of the certificate will be derived from the FQDN passed as the argument to the -host command-line option and the SERVICE string.

-dns FQDN,…​

Create a certificate request containing a subjectAltName extension containing one or more host names. This is used when a certificate may be used by multiple virtual servers or if a host has different names when contacted within or outside a private network. Multiple DNS names can be included in the extension by separating then with a comma.

-ip IP-ADDRESS,…​

Create a certificate request containing a subjectAltName extension containing the IP addresses named by the IP-ADDRESS strings. This is used when a certificate may be used by services listening on multiple networks. Multiple IP addresses can be included in the extension by separating then with a comma.

Examples

Create a user certificate request:

%  grid-cert-request
A certificate request and private key is being created.
You will be asked to enter a PEM pass phrase.
This pass phrase is akin to your account password,
and is used to protect your key file.
If you forget your pass phrase, you will need to
obtain a new certificate.
A private key and a certificate request has been generated with the subject:

/O=org/OU=example/OU=grid/CN=Joe User

If the CN=Joe User is not appropriate, rerun this
script with the -force -cn "Common Name" options.

Your private key is stored in /home/juser/.globus/userkey.pem
Your request is stored in /home/juser/.globus/usercert_request.pem

Please e-mail the request to the Example CA [email protected]
You may use a command similar to the following:

  cat /home/juser/.globus/usercert_request.pem | mail [email protected]

Only use the above if this machine can send AND receive e-mail. if not, please
mail using some other method.

Your certificate will be mailed to you within two working days.
If you receive no response, contact Example CA at [email protected]

Create a host certificate for a host with two names.

%  grid-cert-request -host grid.example.org -dns grid.example.org,grid-internal.example.org

A private host key and a certificate request has been generated
with the subject:

/O=org/OU=example/OU=grid/CN=host/grid.example.org

 ----------------------------------------------------------

The private key is stored in /etc/grid-security/hostkey.pem
The request is stored in /etc/grid-security/hostcert_request.pem

Please e-mail the request to the Example CA [email protected]
You may use a command similar to the following:

 cat /etc/grid-security/hostcert_request.pem | mail [email protected]

Only use the above if this machine can send AND receive e-mail. if not, please
mail using some other method.

Your certificate will be mailed to you within two working days.
If you receive no response, contact Example CA at
[email protected]

Environment Variables

The following environment variables affect the execution of grid-cert-request:

X509_CERT_DIR

Path to the directory containing SSL configuration files for generating certificate requests.

GRID_SECURITY_DIR

Path to the directory containing SSL configuration files for generating certificate requests. This value is used if X509_CERT_DIR is not set.

GLOBUS_LOCATION

Path to the directory containing the Grid Community Toolkit. This is searched if neither the X509_CERT_DIR nor the GRID_SECURITY_DIR environment variables are set.

Files

$HOME/.globus/usercert_request.pem

Default path to write a user certificate request.

$HOME/.globus/usercert.pem

Default path to write a user certificate.

$HOME/.globus/userkey.pem

Default path to write a user private key.

/etc/grid-security/hostcert_request.pem

Default path to write a host certificate request.

/etc/grid-security/hostcert.pem

Default path to write a host certificate.

/etc/grid-security/hostkey.pem

Default path to write a host private key.

TRUSTED-CERT-DIR/globus-user-ssl.conf, TRUSTED-CERT-DIR/globus-user-ssl.conf.CA-HASH

SSL configuration file for requesting a user certificate. The first form is the default location, the second form is used when the -ca command-line option is specified.

TRUSTED-CERT-DIR/globus-host-ssl.conf, TRUSTED-CERT-DIR/globus-host-ssl.conf.CA-HASH

SSL configuration file for requesting a host or service certificate. The first form is the default location, the second form is used when the -ca command-line option is specified.

GRID-DEFAULT-CA(8)

NAME

grid-default-ca - Select default CA for certificate requests

SYNOPSIS

grid-default-ca [-help ] [-h ] [-usage ] [-u ] [-version ] [-versions ]

Description

The grid-default-ca program sets the default certificate authority to use when the grid-cert-request script is run. The CA’s certificate, configuration, and signing policy must be installed in the trusted certificate directory to be able to request certificates from that CA. Note that some CAs have different policies and use other tools to handle certificate requests. Please consult your CA’s support staff if you unsure. The grid-default-ca is designed to work with CAs implemented using the globus_simple_ca package.

By default, the grid-default-ca program displays a list of installed CA certificates and the prompts the user for which one to set as the default. If invoked with the -list command-line option, grid-default-ca will print the list and not prompt nor set the default CA. If invoked with the -ca option, it will not list or prompt, but set the default CA to the one with the hash that matches the CA-HASH argument to that option. If grid-default-ca is used to set the default CA, the caller of this program must have write permissions to the trusted certificate directory.

The grid-default-ca program sets the CA in the one of the grid security directories. It looks in the directory named by the GRID_SECURITY_DIR environment, the X509_CERT_DIR, /etc/grid-security, and , and $GLOBUS_LOCATION/share/certificates. .

The full set of command-line options to grid-default-ca are:

-help, -h, -usage, -u

Display the command-line options to grid-default-ca and exit.

-version, -versions

Display the version number of the grid-default-ca command. The second form includes more details.

-dir CA-DIRECTORY

Use the trusted certificate directory named by CA-DIRECTORY instead of the default.

-list

Instead of changing the default CA, print out a list of all available CA certificates in the trusted certificate directory

-ca CA-HASH

Set the default CA without displaying the list of choices or prompting. The CA file named by CA-HASH must exist.

Examples

List the contents of the trusted certificate directory that contain the string Example:

%  grid-default-ca | grep Example
15) cd1186ff -  /DC=org/DC=Example/DC=Grid/CN=Example CA

Choose that CA as the default:

%  grid-default-ca -ca cd1186ff

setting the default CA to: /DC=org/DC=Example/DC=Grid/CN=Example CA

linking /etc/grid-security/certificates/grid-security.conf.cd1186ff to
        /etc/grid-security/certificates/grid-security.conf

linking /etc/grid-security/certificates/grid-host-ssl.conf.cd1186ff  to
        /etc/grid-security/certificates/grid-host-ssl.conf

linking /etc/grid-security/certificates/grid-user-ssl.conf.cd1186ff  to
        /etc/grid-security/certificates/grid-user-ssl.conf

...done.

Environment Variables

The following environment variables affect the execution of grid-default-ca:

GRID_SECURITY_DIRECTORY

Path to the default trusted certificate directory.

X509_CERT_DIR

Path to the default trusted certificate directory.

GLOBUS_LOCATION

Path to the Grid Community Toolkit installation directory.

Bugs

The grid-default-ca program displays CAs from all of the directories in its search list; however, grid-cert-request only uses the first which contains a grid security configuration.

The grid-default-ca program may display the same CA multiple times if it is located in multiple directories in its search path. However, it does not provide any information about which one would actually be used by the grid-cert-request command.

See Also

grid-cert-request(1)

GRID-CHANGE-PASS-PHRASE(1)

NAME

grid-change-pass-phrase - Change the passphrase of a private key

SYNOPSIS

grid-change-pass-phrase [-help ] [-usage ] [-version ] [-versions ]

Description

The grid-change-pass-phrase program changes the passphrase protecting a private key or PKCS12 bundle containing a private key and certificate. By default, grid-change-pass-phrase uses the X509_USER_KEY environment variable to locate the private key. If that is not set, then it looks for $HOME/.globus/userkey.pem and and $HOME/.globus/usercred.p12 in succession. The path to a key can be specified by using the in succession. The path to a key can be specified by using the -file command-line option.

The full set of command-line options to grid-change-pass-phrase are:

-help, -usage

Display the command-line options to grid-change-pass-phrase and exit.

-version, -versions

Display the version number of the grid-change-pass-phrase command. The second form includes more details.

-file PRIVATE-KEY

Change the passphrase of the private key named by PRIVATE-KEY instead of the default.

Examples

Change the passphrase of the default private key:

%  grid-change-pass-phrase

Enter pass phrase for /home/juser/.globus/userkey.pem:
writing RSA key
Enter PEM pass phrase:
Verifying - Enter PEM pass phrase:

Environment Variables

The following environment variables affect the execution of grid-change-pass-phrase:

X509_USER_KEY

Path to the default private key file.

GRID-PROXY-INIT(1)

NAME

grid-proxy-init - Generate a new proxy certificate

SYNOPSIS

grid-proxy-init [-help ] [-usage ] [-version ]

Description

The grid-proxy-init program generates X.509 proxy certificates derived from the currently available certificate files. By default, this command generates a RFC 3820 Proxy Certificate with a 512 bit key valid for 12 hours in a file named /tmp/x509up_uUID. Command-line options and variables can modify the format, strength, lifetime, and location of the generated proxy certificate. . Command-line options and variables can modify the format, strength, lifetime, and location of the generated proxy certificate.

X.509 proxy certificates are short-lived certificates, signed usually by a user’s identity certificate or another proxy certificate. The key associated with a proxy certificate is unencrypted, so applications can authenticate using a proxy identity without providing a passphrase.

Proxy certificates provide a convenient alternative to constantly entering passwords, but are also less secure than the user’s normal security credential. Therefore, they should always be user-readable only (this is enforced by the GSI libraries), and should be deleted after they are no longer needed.

This version of grid-proxy-init supports three different proxy formats: the old proxy format used in early releases of the Globus Toolkit up to version 2.4.x, an IETF draft version of X.509 Proxy Certificate profile used in Globus Toolkit 3.0.x and 3.2.x, and the RFC 3820 profile used in Globus Toolkit Version 4.0.x and 4.2.x. By default, this version of grid-proxy-init creates an RFC 3820 compliant proxy. To create a proxy compatible with older versions of the Globus Toolkit, use the -old or -draft command-line options.

The full set of command-line options to grid-proxy-init are:

-help, -usage

Display the command-line options to grid-proxy-init.

-version

Display the version number of the grid-proxy-init command

-debug

Display information about the path to the certificate and key used to generate the proxy certificate, the path to the trusted certificate directory, and verbose error messages

-q

Suppress all output from grid-proxy-init except for passphrase prompts.

-verify

Perform certificate chain validity checks on the generated proxy.

-valid HOURS:'MINUTES', -hours HOURS

Create a certificate that is valid for HOURS hours and MINUTES minutes. If not specified, the default of twelve hours and no minutes is used.

-cert CERTFILE, -key KEYFILE

Create a proxy certificate signed by the certificate located in CERTFILE using the key located in using the key located in KEYFILE. If not specified the default certificate and key will be used. This overrides the values of environment variables described below.. If not specified the default certificate and key will be used. This overrides the values of environment variables described below.

-certdir CERTDIR

Search CERTDIR for trusted certificates if verifying the proxy certificate. If not specified, the default trusted certificate search path is used. This overrides the value of the X509_CERT_DIR environment variable

-out PROXYPATH

Write the generated proxy certificate file to PROXYPATH instead of the default path of /tmp/x509up_uUID..

-bits BITS

When creating the proxy certificate, use a BITS bit key instead of the default 512 bit keys.

-policy POLICYFILE

Add the certificate policy data described in POLICYFILE as the ProxyCertInfo X.509 extension to the generated proxy certificate.

-pl POLICY-OID, -policy-language POLICY-OID

Set the policy language identifier of the policy data specified by the -policy command-line option to the oid specified by the POLICY-OID string.

-path-length MAXIMUM

Set the maximum length of the chain of proxies that can be created by the generated proxy to MAXIMUM. If not set, the default of an unlimited proxy chain length is used.

-pwstdin

Read the private key’s passphrase from stdin instead of reading input from the controlling tty. This is useful when scripting grid-proxy-init.

-limited

Create a limited proxy. Limited proxies are generally refused by process-creating services, but may be used to authorize with other services.

-independent

Create an independent proxy. An independent proxy is not treated as an impersonation proxy but as a separate identity for authorization purposes.

-draft

Create a IETF draft proxy instead of the default RFC 3280-compliant proxy. This type of proxy uses a non-standard proxy policy identifier. This might be useful for authenticating with older versions of the Globus Toolkit.

-old

Create a legacy proxy instead of the default RFC 3280-compliant proxy. This type of proxy uses a non-standard method of indicating that the certificate is a proxy and whether it is limited. This might be useful for authenticating with older versions of the Globus Toolkit.

-rfc

Create an RFC 3820-compliant proxy certificate. This is the default for this version of grid-proxy-init.

Examples

To create a proxy with the default lifetime and format, run the grid-proxy-init program with no arguments. For example:

%  grid-proxy-init
Your identity: /DC=org/DC=example/CN=Joe User
Enter GRID pass phrase for this identity: Creating proxy .................................. Done
Your proxy is valid until: Thu Mar 18 03:48:05 2010

To create a stronger proxy that lasts for only 8 hours, use the -hours and -bits command-line options to grid-proxy-init. For example:

%  grid-proxy-init -hours 8 -bits 1024
Your identity: /DC=org/DC=example/CN=Joe User
Enter GRID pass phrase for this identity: Creating proxy .................................. Done
Your proxy is valid until: Thu Mar 17 23:48:05 2010

Environment Variables

The following environment variables affect the execution of grid-proxy-init:

X509_USER_CERT

Path to the certificate to use as issuer of the new proxy.

X509_USER_KEY

Path to the key to use to sign the new proxy.

X509_CERT_DIR

Path to the directory containing trusted certifiate certificates and signing policies.

Files

The following files affect the execution of grid-proxy-init:

$HOME/.globus/usercert.pem

Default path to the certificate to use as issuer of the new proxy.

$HOME/.globus/userkey.pem

Default path to the key to use to sign the new proxy.

Compatibility

For more information about proxy certificate types and their compatibility in GT and GCT, see http://dev.globus.org/wiki/Security/ProxyCertTypes.

See Also

grid-proxy-destroy(1), grid-proxy-info(1)

GRID-PROXY-DESTROY(1)

NAME

grid-proxy-destroy - Destroy the default proxy certificate

SYNOPSIS

grid-proxy-destroy [-help ] [-usage ] [-version ]

Description

The grid-proxy-destroy program removes X.509 proxy files from the local filesystem. It overwrites the data in the files and removes the files from the filesystem. By default, it removes the current user’s default proxy (either /tmp/x509up_uUID where where UID is the current POSIX user id, or the file pointed to by the X509_USER_PROXY environment variable) unless a list of proxy file paths are included as part of the command line.

Use the -- command-line option to separate a list of proxy paths from command line options if the proxy file begins with the - character.

The full list of command-line options to grid-proxy-destroy are:

-help, -usage

Display the command-line options to grid-proxy-destroy.

-version

Display the version number of the grid-proxy-destroy command

-debug

Display verbose error messages.

-dryrun

Do not remove the proxy, but display the path of the files that would have been removed, or the directory where they would have been removed from if the -all command-line option is used.

-default

Remove the default proxy in addition to the files included on the command-line. Only needed if other paths are included on the command-line.

-all

Remove the default proxy and all delegated proxies in the temporary file directory.

Environment Variables

The following environment variables affect the execution of grid-proxy-destroy:

X509_USER_PROXY

Path to the default user proxy.

See Also

grid-proxy-init(1), grid-proxy-info(1)

GRID-PROXY-INFO(1)

NAME

grid-proxy-info - Display information about a proxy certificate

SYNOPSIS

grid-proxy-info [-help ] [-usage ] [-version ]

Description

The grid-proxy-info program extracts information from an X.509 proxy certificates, and optionally displays or returns an exit code based on that information.

The default mode of operation is to print the following facts about the current user’s default proxy: subject, issuer, identity, type, strength, path, and time left. If the command-line option -exists or -e is included in the command-line, nothing is printed unless one of the print options is specified. Instead, grid-proxy-info determines if a valid proxy exists and, if so, exits with the exit code 0; if a proxy does not exist or is not valid, grid-proxy-info exits with the exit code 1. Additional validity criteria can be added by using the -valid, -v, -hours, -h, -bits, or -b command-line options. If used, these options must occur after the -e or -exists command-line options. Those options are only valid if one of the -e or -exists command-line options is used.

The complete set of command-line options to grid-proxy-info are:

-help, -usage

Display the command-line options to grid-proxy-info.

-version

Display the version number of the grid-proxy-info command

-debug

Display verbose error messages.

-file PROXYFILE, -f PROXYFILE

Read the proxy located in the file PROXYFILE instead of using the default proxy.

-subject, -s

Display the proxy certificate’s subject distinguished name.

-issuer, -i

Display the proxy certificate issuer’s distinguished name.

-identity

Display the proxy certificate’s identity. For non-independent proxies, the identity is the subject of the certificate which issued the first proxy in the proxy chain.

-type

Display the type of proxy certificate. The type string includes the format ("legacy", "draft", or RFC 3280 compliant), identity type ("impersonation" or "independent"), and policy ("limited" or "full"). See grid-proxy-init(1) for information about how to create different types of proxies.

-timeleft

Display the number of seconds remaining until the proxy certificate expires.

-strength

Display the strength (in bits) of the key associated with the proxy certificate.

-all

Display the default information for the proxy when also using the -e or -exists command-line option.

-text

Display the proxy certificate contents to standard output, including policy information, issuer, public key, and modulus.

-path

Display the path to the file containing the default proxy certificate.

-rfc2253

Display distinguished names for the subject, issuer, and identity using the string representation described in RFC 2253, instead of the legacy format.

-exists, -e

Perform an existence and validity check for the proxy. If a valid proxy exists and matches the criteria described by other command-line options (if any), exit with 0; otherwise, exit with 1. This option must be before other validity check predicate in the command-line options. If this option is specified, the output of the default facts about the proxy is disabled. Use the -all option to have the information displayed as well as the exit code set.

-valid HOURS:'MINUTES', -v HOURS:'MINUTES', -hours HOURS, -h HOURS

Check that the proxy certificate is valid for at least HOURS hours and MINUTES minutes. If it is not, grid-proxy-info will exit with exit code 1.

-bits BITS, -b BITS

Check that the proxy certificate key strength is at least BITS bits.

Environment Variables

The following environment variables affect the execution of grid-proxy-info:

X509_USER_PROXY

Path to the default user proxy.

See Also

grid-proxy-init(1), grid-proxy-destroy(1)

GRID-MAPFILE-ADD-ENTRY(8)

NAME

grid-mapfile-add-entry - Add an entry to a gridmap file

SYNOPSIS

grid-mapfile-add-entry [-help ] [-usage ] [-version ] [-versions ]

Description

The grid-mapfile-add-entry program adds a new mapping from an X.509 distinguished name to a local POSIX user name to a gridmap file. Gridmap files are used as a simple authorization method for services such as GRAM5 or GridFTP.

The grid-mapfile-add-entry program verifies that the LOCAL-NAME is a valid user name on the system on which it was run, and that the mapping between DISTINGUISHED-NAME and LOCAL-NAME does not already exist in the gridmap file.

By default, grid-mapfile-add-entry will modify the gridmap file named by the GRIDMAP environment variable if present, or the file /etc/grid-security/grid-mapfile if not. This can be changed by the use of the if not. This can be changed by the use of the -mapfile or -f command-line options.

If the gridmap file does not exist, grid-mapfile-add-entry will create it. If it already exists, grid-mapfile-add-entry will save the current contents of the file to a new file with the string .old appended to the file name.

The full set of command-line options to grid-mapfile-add-entry are:

-help, -usage

Display the command-line options to grid-mapfile-add-entry.

-version, -versions

Display the version number of the grid-mapfile-add-entry command. The second form includes more details.

-dn DISTINGUISHED-NAME

The X.509 distinguished name to add a mapping for. The name should be in OpenSSL’s oneline format.

-ln LOCAL-NAME…​

The POSIX user name to map the distinguished name to. This name must be a valid username. Add multiple LOCAL-NAME strings after the -ln command-line option. If any of the local names are invalid, no changes will be made to the gridmap file. Note that if multiple occurances of the -ln command-line option are present, only the the last one will be added.

-d, -dryrun

Verify local names and display diagnostics about what would be added to the gridmap file, but don’t actually modify the file.

-mapfile MAPFILE, -f MAPFILE

Modify the gridmap file named by MAPFILE instead of the default.

Examples

Add a mapping between the current user’s certificate to the current user id to a gridmap file in $HOME/.gridmap: :

%  grid-mapfile-add-entry -f $HOME/.gridmap -dn "`grid-cert-info -subject`" -ln "`id -un`"
Modifying /home/juser/.gridmap ...
/home/juser/.gridmap does not exist... Attempting to create /home/juser/.gridmap
New entry:
"/DC=org/DC=example/DC=grid/CN=Joe User" juser
(1) entry added

Add a mapping between the a distinguished name and multiple local names:

%  grid-mapfile-add-entry -dn "/DC=org/DC=example/DC=grid/CN=Joe User" juser" local1 local2
Modifying /home/juser/.gridmap ...
/home/juser/.gridmap does not exist... Attempting to create /home/juser/.gridmap
New entry:
"/DC=org/DC=example/DC=grid/CN=Joe User" local1,local2
(1) entry added

Environment Variables

The following environment variables affect the execution of grid-mapfile-add-entry:

GRIDMAP

Path to the default gridmap to modify.

Files

The following files affect the execution of grid-mapfile-add-entry:

/etc/grid-security/grid-mapfile

Path to the default gridmap to modify if GRIDMAP environment variable is not set.

See Also

grid-mapfile-check-consistency(8), grid-mapfile-delete-entry(8)

GRID-MAPFILE-CHECK-CONSISTENCY(8)

NAME

grid-mapfile-check-consistency - Add an entry to a grid map file

SYNOPSIS

grid-mapfile-check-consistency [-h ] [-help ] [-usage ] [-version ]

Description

The grid-mapfile-check-consistency program performs basic checks for validity of a gridmap file. These checks include checks for existence, duplication of entries, and valid local user names. If the gridmap file is valid, grid-mapfile-check-consistency exits with a zero exit code, otherwise it exits with a non-zero exit code. In either case, it displays information about its progress as it parses and validates the gridmap file.

By default, grid-mapfile-check-consistency will check the gridmap file named by the GRIDMAP environment variable if present. If that variable is not set, it will check the file $HOME/.gridmap for non-root users if present. If that doesn’t exist or for non-root users if present. If that doesn’t exist or grid-mapfile-check-consistency is run as root, it will then check /etc/grid-security/grid-mapfile. This can be changed by the use of the . This can be changed by the use of the -mapfile or -f command-line options.

The full set of command-line options to grid-mapfile-check-consistency are:

-help, -h, -usage

Display the command-line options to grid-mapfile-check-consistency.

-version

Display the version number of the grid-mapfile-check-consistency command.

-mapfile MAPFILE, -f MAPFILE

Check the gridmap file named by MAPFILE instead of the default.

Examples

Check that the gridmap file in /etc/grid-security is valid: is valid:

%  grid-mapfile-check-consistency -f /etc/grid-security/grid-mapfile
Checking /etc/grid-security/grid-mapfile
Verifying grid mapfile existence...OK
Checking for duplicate entries...OK
Checking for valid user names...OK

Check a gridmap file that has an invalid local user name:

%  grid-mapfile-check-consistency -f /etc/grid-security/grid-mapfile
Checking /etc/grid-security/grid-mapfile
Verifying grid mapfile existence...OK
Checking for duplicate entries...OK
ERROR: baduser is not a valid local username
ERROR: Found 1 invalid username(s)

Environment Variables

The following environment variables affect the execution of grid-mapfile-check-consistency:

GRIDMAP

Path to the default gridmap to check.

Files

The following files affect the execution of grid-mapfile-check-consistency:

$HOME/.gridmap

Path to the default gridmap to check if the GRIDMAP environment variable is not set for non-root users.

/etc/grid-security/grid-mapfile

Path to the default gridmap to check if GRIDMAP environment variable is not set and the above file does not exist.

See Also

grid-mapfile-add-entry(8), grid-mapfile-delete-entry(8)

GRID-MAPFILE-DELETE-ENTRY(8)

NAME

grid-mapfile-delete-entry - Remove entries from a gridmap file

SYNOPSIS

grid-mapfile-delete-entry [-help ] [-usage ] [-version ] [-versions ]

Description

The grid-mapfile-delete-entry program deletes mappings from a gridmap file. If both the -dn and -ln> options are specified, grid-mapfile-delete-entry removes entries which meet both criteria (remove entries mapping DISTINGUISHED-NAME to LOCAL-NAME for each LOCAL-NAME specified). If only -dn or -ln is specified all entries for that DISTINGUISHED-NAME or LOCAL-NAME are removed.

By default, grid-mapfile-delete-entry will modify the gridmap file named by the GRIDMAP environment variable if present, or the file /etc/grid-security/grid-mapfile if not. This can be changed by the use of the if not. This can be changed by the use of the -mapfile or -f command-line options.

Prior to modifying a gridmap file, grid-mapfile-delete-entry saves its current contents to a file with the string .old appended to the original file name.

The full set of command-line options to grid-mapfile-delete-entry are:

-help, -usage

Display the command-line options to grid-mapfile-delete-entry.

-version, -versions

Display the version number of the grid-mapfile-delete-entry command. The second form includes more details.

-dn DISTINGUISHED-NAME

The X.509 distinguished name to remove from the gridmap file. If the -ln option is not specified, remove all entries for this name; otherwise, remove entries that match both this name and the local name. The name should be in OpenSSL’s oneline format.

-ln LOCAL-NAME…​

The POSIX user name to remove from the gridmap file. Include multiple LOCAL-NAME strings after the -ln command-line option to remove multiple names from the gridmap. If the -dn option is not specifeid, remove all entries for these names; otherwise, remove entries that match the DISTINGUISHED-NAME and any of the LOCAL-NAME values.

-d, -dryrun

Display diagnostics about what would be removed from the gridmap file, but don’t actually modify the file.

-mapfile MAPFILE, -f MAPFILE

Modify the gridmap file named by MAPFILE instead of the default.

Examples

Remove all mappings for a distinguished name:

%  grid-mapfile-delete-entry "/DC=org/DC=example/DC=grid/CN=Joe User"
Modifying /etc/grid-security/grid-mapfile ...
Deleting entry: "/DC=org/DC=example/DC=grid/CN=Joe User" juser,juser2
(1) entry deleted

Remove the mapping between a distinguished name and a single local username:

%  grid-mapfile-delete-entry "/DC=org/DC=example/DC=grid/CN=Joe User" -ln juser2
Modifying /etc/grid-security/grid-mapfile ...
Current entry: "/DC=org/DC=example/DC=grid/CN=Joe User" juser
(1) mapping removed: (juser2), (0) not present and ignored
(0) entries deleted

Environment Variables

The following environment variables affect the execution of grid-mapfile-delete-entry:

GRIDMAP

Path to the default gridmap to modify.

Files

The following files affect the execution of grid-mapfile-delete-entry:

/etc/grid-security/grid-mapfile

Path to the default gridmap to modify if GRIDMAP environment variable is not set.

See Also

grid-mapfile-add-entry(8), grid-mapfile-check-consistency(8)

Configuring GSI

This section describes the configuration steps required to:

  • Configure SSL/TLS security parameters

    determine whether or not to trust certificates issued by a particular Certificate Authority (CA),

  • provide appropriate default values for use by the grid-cert-request command, which is used to generate certificates,

  • request service certificates, used by services to authenticate themselves to users, and

  • specify identity mapping information.

In general, GCT tools will look for a configuration file in a user-specific location first, and in a system-wide location if no user-specific file was found. The configuration commands described here may be run by administrators to create system-wide defaults and by individuals to override those defaults.

Configuring Global Security Parameters

The configuration file described here was added with the package globus-gssapi-gsi-11.16 and the toolkit binary package version 6.0.1430141288.

The global security parameters for GSIC are included in the file /etc/grid-security/gsi.conf. This file contains the default values used by all GSI-enabled servers and clients. The format of the file is a sequence of lines containing a single NAME=VALUE pair, with comments beginning with the # character. All values in the default configuration file may be overridden by setting the corresponding environment variable for a particular process.

The NAME strings that are currently understood are

Table 1. GSI Configuration Values
Configuration Entry Description Environment Override Default Value

FORCE_TLS

A flag to choose whether to force TLS or to allow SSLv3 as well. Set this to true to disable SSLv3, or false to allow either to be negotiated.

GLOBUS_GSSAPI_FORCE_TLS

false

NAME_COMPATIBILITY

GSSAPI Name compatibility mode when trying to determine if a host certificate is legitimate. GSI predates RFC2818, so old versions of GSI use some old, less-secure, practices. The possible values are described in GLOBUS_GSSAPI_NAME_COMPATIBILITY

GLOBUS_GSSAPI_NAME_COMPATIBILITY

HYBRID

CIPHERS

OpenSSL Cipher List. This is an preference-ordered list of OpenSSL cipher names. See the OpenSSL cipher documentation for information on the syntax of this string.

GLOBUS_GSSAPI_CIPHERS

HIGH

Configuring GCT to Trust a Particular Certificate Authority

Trusted certificates directory

The GCT tools will trust certificates issued by a CA if (and only if) it can find information about the CA in the trusted certificates directory.

The trusted certificates directory is located as described below and exists either on a per-machine or on a per-installation basis.

X509_CERT_DIR is the environment variable used to specify the path to the trusted certificates directory. This directory contains information about which CAs are trusted (including the CA certificates themselves) and, in some cases, configuration information used by grid-cert-request to formulate certificate requests. The location of the trusted certificates directory is looked for in the following order: . value of the X509_CERT_DIR environment variable

  1. $HOME/.globus/certificates

  2. /etc/grid-security/certificates exists exists

  3. $GLOBUS_LOCATION/share/certificates

Trusted certificates files

The following two files must exist in the directory for each trusted CA:

cert_hash.0

The trusted CA Certificate.

cert_hash.signing_policy

A configuration file defining the distinguished names of certificates signed by the CA.

GCT components will honor a certificate only if:

  • its CA certificate exists (with the appropriate name) in the TRUSTED_CA directory, and

  • the certificate’s distinguished name matches the pattern described in the signing policy file.

Hash of the CA certificate

The cert_hash that appears in the file names above is the hash of the CA certificate, which can be found by running the command:

openssl x509 -hash -noout < ca_certificate

Creating a signing policy by hand

Some CAs provide tools to install their CA certificates and signing policy files into the trusted certificates directory. You can, however, create a signing policy file by hand; the signing policy file has the following format:

access_id_CA X509 'CA Distinguished Name'
pos_rights globus CA:sign
cond_subjects globus '"Distinguished Name Pattern"'

In the above, the CA Distinguished Name is the subject name of the CA certificate, and the Distinguished Name Pattern is a string used to match the distinguished names of certificates granted by the CA.

Some very simple wildcard matching is done: if the Distinguished Name Pattern ends with a , then any distinguished name that matches the part of the CA subject name before the is considered a match.

Note: the cond_subjects line may contain a space-separated list of distinguished name patterns.

Repository of CAs

A repository of CA certificates that are widely used in academic and research settings can be found here.

Configuring GCT to Create Appropriate Certificate Requests

The grid-cert-request command, which is used to create certificates, uses the following configuration files:

globus-user-ssl.conf

Defines the distinguished name to use for a user’s certificate request. The format is described here.

globus-host-ssl.conf

Defines the distinguished name for a host (or service) certificate request. The format is described here. grid-security.conf: A base configuration file that contains the name and email address for the CA. directions: An optional file that may contain directions on using the CA.

Many CAs provide tools to install configuration files with the following names in the Trusted Certificates directory:

  • globus-user-ssl.conf.cert_hash

  • globus-host-ssl.conf.cert_hash

  • grid_security.conf.cert_hash

  • directions.cert_hash

Creating a certificate request for a specific CA

The command:

grid-cert-request -ca cert_hash

will create a certificate request based on the specified CA’s configuration files.

Listing available CAs

The command:

grid-cert-request -ca

will list the available CAs and let the user choose which one to create a request for.

Specifying a default CA for certificate requests

The default CA is the CA that will be used for certificate requests if grid-cert-request is invoked without the -ca flag.

You can specify a default CA by invoking the grid-default-ca command (follow the link for examples of using the command).

directions file file

The directions file may contain specific directions on how to use the CA. There are three types of printed messages: file may contain specific directions on how to use the CA. There are three types of printed messages:

  • REQUEST HEADER, printed to a certificate request file,

  • USER INSTRUCTIONS, printed on the screen when one requests a user certificate,

  • NONUSER INSTRUCTIONS, printed on the screen when one requests a certificate for a service.

Each message is delimited from others with lines ----- BEGIN message type TEXT ----- and ----- END message type TEXT -----. For example, the directions file would contain the following lines: file would contain the following lines:

----- BEGIN REQUEST HEADER TEXT -----
This is a Certificate Request file

It should be mailed to ${GSI_CA_EMAIL_ADDR}
 ----- END REQUEST HEADER TEXT -----

If this file does not exist, the default messages are printed.

Requesting Service Certificates

Different CAs use different mechanisms for issuing end-user certificates; some use mechanisms that are entirely web-based, while others require you to generate a certificate request and send it to the CA. If you need to create a certificate request for a service certificate, you can do so by running:

grid-cert-request -host hostname -service service_name

where hostname is the fully-qualified name of the host on which the service will be running, and service_name is the name of the service. This will create the following three files:

GRID_SECURITY/service_name/service_namecert.pem

An empty file. When you receive your actual service certificate from your CA, you should place it in this file.

GRID_SECURITY/service_name/service_namecert_request.pem

The certificate request, which you should send to your CA.

GRID_SECURITY/service_name/service_namekey.pem

The private key associated with your certificate request, encrypted with the pass phrase that you entered when prompted by grid-cert-request.

The grid-cert-request command recognizes several other useful options; you can list these with:

grid-cert-request -help

Configuring Credential Mappings

Several GCT services map certificates to local unix usernames to be used with unix services. The default implementation uses a gridmap file to map the distinguished name of the identity of the client’s certificate to a local login name. Administrators can modify the contents of the gridmap file to control what certificate identities are allowed to access GCT services, as well as configure, via an environment variable, what gridmap file a particular service uses.

In addition to the identity-based mapping done via the gridmap file, administrators can configure GCT services to to use arbitrary mapping functions. These may use other criteria, such as SAML assertions, to map a certificate to a local account, or may map certificates to temporary accounts. Administrators can install different mapping implementations and configure services to use them by creating appropriate configuration files and setting environment variables.

Configuring Identity Mappings Using gridmap Files Files

Gridmap files contain a database of entries mapping distinguished names to local user names. These may be manipulated by using the following tools.

Adding an entry to a gridmap file

To add an entry to the gridmap file, run:

$GLOBUS_LOCATION/sbin/grid-mapfile-add-entry \
        -dn "Distinguished Name" \
        -ln local_name
Deleting an entry from a gridmap file

To delete an entry from the gridmap file, run:

$GLOBUS_LOCATION/sbin/grid-mapfile-delete-entry \
        -dn "Distinguished Name" \
        -ln local_name
Checking consistency of a gridmap file

To check the consistency of the gridmap file, run

$GLOBUS_LOCATION/sbin/grid-mapfile-check-consistency
Configuring per-service gridmap files

To configure a service to use a particular gridmap file, set the GRIDMAP variable in the service’s environment to the path of the gridmap file. In this way, you can grant different access rights to different certificate identities on a per-service basis by setting the GRIDMAP variable in different service environments.

You can use tools described above to operate on different gridmap files by either setting the GRIDMAP environment variable prior to invoking them, or by using the -mapfile command-line option.

For reference, the GSI C code looks for the gridmap in these locations:

GRIDMAP environment variable

Default

/etc/grid-security/grid-mapfile

For services running as root. </simpara> HOME/.gridmap: For services not running as root.

Gridmap formats

A gridmap line of the form:

"Distinguished Name" local_name

maps the distinguished name Distinguished Name to the local name local_name.

A gridmap line of the form:

"Distinguished Name" local_name1,local_name2

maps Distinguished Name to both local_name1 and local_name2; any number of local user names may occur in the comma-separated local name list.

For more detailed information about the gridmap file see the file description and grammars on dev.globus.org.

Configuring Alternate Credential Mappings

To use an alternative credential mapping, you create a gsi-authz.conf file containing information about how the mapping functions are called from the authorization library. file containing information about how the mapping functions are called from the authorization library.

To configure a per-service authorization configuration file, set the GSI_AUTHZ_CONF variable to the path to the configuration file in the environment of the service.

For reference, the GSI C code looks for the authorization configuration file in these locations (in the given order):

  1. GSI_AUTHZ_CONF environment variable

  2. /etc/grid-security/gsi-authz.conf

  3. GLOBUS_LOCATION/etc/gsi-authz.conf

  4. HOME/.gsi-authz.conf

Callout File Format

The authorization file defines a set of callouts, one per line. Each callout is defined by an abstract type, library, and symbol separated by whitespace. Comments begin with the # character and continue to the end of line.

abstract type

Type of the callout: globus_mapping is used for credential mapping callouts

library

Path to the shared object containing the callout implementation. The library name may be a literal filename, or a partial filename to which the compilation flavor of the service is appended to the filename before its extension.

symbol

The exported symbol containing the entry point to the callout implementation.

Here is a sample gsi-authz.conf file that configures a file that configures a globus_mapping callout to use the globus_gridmap_callout function in the /usr/local/globus/lib/libglobus_gridmap_callout shared object: shared object:

# abstract-type     library                                            symbol

globus_mapping      /opt/globus/lib/libglobus_gridmap_callout globus_gridmap_callout

GSI File Permissions Requirements

  • End Entity Certificate (User, Host and Service) Certificates and the GSI Authorization Callout Configuration File:

    • May not be executable

    • May not be writable by group and other

    • Must be either regular files or soft links

  • Private Keys and Proxy Credentials:

    • Must be owned by the current (effective) user

    • May not be executable

    • May not be readable by group and other

    • May not be writable by group and other

    • Must be either regular files or soft links

  • CA Certificates, CA Signing Policy Files, the Grid Map File and the GAA Configuration File:

    • Must be either regular files or soft links

    • GSI Authorization callout configuration files

    • Must exist

    • Should be world readable

    • Should not be writable by group and other

    • Should be either a regular file or a soft link

  • GSI GAA configuration files:

    • Must exist

    • Should be world readable

    • Should not be writable by group and other

    • Should be either a regular file or a soft link

Environment variable interface

Environmental Variables for GSI C

Credentials

Credentials are looked for in the following order:

  1. service credential

  2. host credential

  3. proxy credential

  4. user credential

X509_USER_PROXY specifies the path to the proxy credential. If X509_USER_PROXY is not set, the proxy credential is created (by grid-proxy-init) and searched for (by client programs) in an operating-system-dependent local temporary file.

X509_USER_CERT and X509_USER_KEY specify the path to the end entity (user, service, or host) certificate and corresponding private key. The paths to the certificate and key files are determined as follows:

For service credentials:

  1. If X509_USER_CERT and X509_USER_KEY exist and contain a valid certificate and key, those files are used.

  2. Otherwise, if the files /etc/grid-security/service/servicecert.pem and and /etc/grid-security/service/servicekey.pem exist and contain a valid certificate and key, those files are used. exist and contain a valid certificate and key, those files are used.

  3. Otherwise, if the files $GLOBUS_LOCATION/etc/grid-security/service/servicecert.pem and and $GLOBUS_LOCATION/etc/grid-security/service/servicekey.pem exist and contain a valid certificate and key, those files are used. exist and contain a valid certificate and key, those files are used.

  4. Otherwise, if the files service/servicecert.pem and and service/servicekey.pem in the user’s in the user’s .globus directory exist and contain a valid certificate and key, those files are used. directory exist and contain a valid certificate and key, those files are used.

For host credentials:

  1. If X509_USER_CERT and X509_USER_KEY exist and contain a valid certificate and key, those files are used.

  2. Otherwise, if the files /etc/grid-security/hostcert.pem and and /etc/grid-security/hostkey.pem exist and contain a valid certificate and key, those files are used. exist and contain a valid certificate and key, those files are used.

  3. Otherwise, if the files $GLOBUS_LOCATION/etc/hostcert.pem and and $GLOBUS_LOCATION/etc/hostkey.pem exist and contain a valid certificate and key, those files are used. exist and contain a valid certificate and key, those files are used.

  4. Otherwise, if the files hostcert.pem and and hostkey.pem in the user’s in the user’s .globus directory, exist and contain a valid certificate and key, those files are used. directory, exist and contain a valid certificate and key, those files are used.

For user credentials:

  1. If X509_USER_CERT and X509_USER_KEY exist and contain a valid certificate and key, those files are used.

  2. Otherwise, if the files usercert.pem and and userkey.pem exist in the user’s exist in the user’s .globus directory, those files are used. directory, those files are used.

  3. Otherwise, if a PKCS-12 file called usercred.p12 exists in the user’s exists in the user’s .globus directory, the certificate and key are read from that file. directory, the certificate and key are read from that file.

Gridmap file

GRIDMAP specifies the path to the grid map file, which is used to map distinguished names (found in certificates) to local names (such as login accounts). The location of the grid map file is determined as follows: . If the GRIDMAP environment variable is set, the grid map file location is the value of that environment variable.

  1. Otherwise:

    • If the user is root (uid 0), then the grid map file is /etc/grid-security/grid-mapfile..

    • Otherwise, the grid map file is $HOME/.gridmap..

Trusted CAs directory

X509_CERT_DIR is used to specify the path to the trusted certificates directory. This directory contains information about which CAs are trusted (including the CA certificates themselves) and, in some cases, configuration information used by grid-cert-request to formulate certificate requests. The location of the trusted certificates directory is determined as follows: . If the X509_CERT_DIR environment variable is set, the trusted certificates directory is the value of that environment variable.

  1. Otherwise, if $HOME/.globus/certificates exists, that directory is the trusted certificates directory. exists, that directory is the trusted certificates directory.

  2. Otherwise, if /etc/grid-security/certificates exists, that directory is the trusted certificates directory. exists, that directory is the trusted certificates directory.

  3. Finally, if $GLOBUS_LOCATION/share/certificates exists, then it is the trusted certificates directory. exists, then it is the trusted certificates directory.

GSI authorization callout configuration file

GSI_AUTHZ_CONF is used to specify the path to the GSI authorization callout configuration file. This file is used to configure authorization callouts used by both the gridmap and the authorization API. The location of the GSI authorization callout configuration file is determined as follows: . If the GSI_AUTHZ_CONF environment variable is set, the authorization callout configuration file location is the value of this environment variable.

  1. Otherwise, if /etc/grid-security/gsi-authz.conf exists, then this file is used. exists, then this file is used.

  2. Otherwise, if $GLOBUS_LOCATION/etc/gsi-authz.conf exists, then this file is used. exists, then this file is used.

  3. Finally, if $HOME/.gsi-authz.conf exists, then this file is used. exists, then this file is used.

GAA (Generic Authorization and Access control) configuration file

GSI_GAA_CONF is used to specify the path to the GSI GAA (Generic Authorization and Access control) configuration file. This file is used to configure policy language specific plugins to the GAA-API. The location of the GSI GAA configuration file is determined as follows: . If the GSI_GAA_CONF environment variable is set, the GAA configuration file location is the value of this environment variable.

  1. Otherwise, if /etc/grid-security/gsi-gaa.conf exists, then this file is used. exists, then this file is used.

  2. Otherwise, if $GLOBUS_LOCATION/etc/gsi-gaa.conf exists, then this file is used. exists, then this file is used.

  3. Finally, if $HOME/.gsi-gaa.conf exists, then this file is used. exists, then this file is used.

Grid security directory

GRID_SECURITY_DIR specifies a path to a directory containing configuration files that specify default values to be placed in certificate requests. This environment variable is used only by the grid-cert-request and grid-default-ca commands.

The location of the grid security directory is determined as follows: . If the GRID_SECURITY_DIR environment variable is set, the grid security directory is the value of that environment variable.

  1. If the configuration files exist in /etc/grid-security, the grid security directory is that directory., the grid security directory is that directory.

  2. if the configuration files exist in $GLOBUS_LOCATION/etc, the grid security directory is that directory., the grid security directory is that directory.

Using TLS

GLOBUS_GSSAPI_FORCE_TLS specifies whether to use TLS by default when establishing a security context. The default behavior if this is not set is to use SSLv3.

Name Comparisons

GLOBUS_GSSAPI_NAME_COMPATIBILITY specifies what name matching algorithms are supported by GSSAPI for mutual authentication and gss_compare_name. This variable may be set to any of the following values:

STRICT_GT2

Strictly backward-compatible with GT 2.0 name matching. X.509 subjectAltName values are ignored. Names with hyphens are treated as wildcarded as described in the security considerations documentation. Name matching will rely on canonical host name associated with connection IP addresses.

STRICT_RFC2818

Support RFC 2818 server identity processing. Hyphen characters are treated as normal part of a host name. DNSName and IPAddress subjectAltName extensions are matched against the host and port passed to GSSAPI. If subjectAltName is present, X.509 SubjectName is ignored. HYBRID: Support a hybrid of the two previous name matching algorithms, liberally matching both hyphen wildcards, canonical names associated with IP addresses, and subjectAltName extensions.

If this variable is not set, the HYBRID behavior is used.

Errors

Credential Troubleshooting

Credential Errors

The following are some common problems that may cause clients or servers to report that credentials are invalid:

Table 2. Credential Errors
Error Code Definition Possible Solutions

Your proxy credential may have expired

Your proxy credential may have expired.

Use grid-proxy-info to check whether the proxy credential has actually expired. If it has, generate a new proxy with grid-proxy-init.

The system clock on either the local or remote system is wrong.

This may cause the server or client to conclude that a credential has expired.

Check the system clocks on the local and remote system.

Your end-user certificate may have expired

Your end-user certificate may have expired

Use grid-cert-info to check your certificate’s expiration date. If it has expired, follow your CA’s procedures to get a new one.

The permissions may be wrong on your proxy file

If the permissions on your proxy file are too lax (for example, if others can read your proxy file), Grid Community Toolkit clients will not use that file to authenticate.

You can "fix" this problem by changing the permissions on the file or by destroying it (with grid-proxy-destroy) and creating a new one (with grid-proxy-init).

[IMPORTANT]

However, it is still possible that someone else has made a copy of that file during the time that the permissions were wrong. In that case, they will be able to impersonate you until the proxy file expires or your permissions or end-user certificate are revoked, whichever happens first.

The permissions may be wrong on your private key file

If the permissions on your end user certificate private key file are too lax (for example, if others can read the file), grid-proxy-init will refuse to create a proxy certificate.

You can "fix" this by changing the permissions on the private key file.

[IMPORTANT]

However, you will still have a much more serious problem: it is possible that someone has made a copy of your private key file. Although this file is encrypted, it is possible that someone will be able to decrypt the private key, at which point they will be able to impersonate you as long as your end user certificate is valid. You should contact your CA to have your end-user certificate revoked and get a new one.

The remote system may not trust your CA

The remote system may not trust your CA

Verify that the remote system is configured to trust the CA that issued your end-entity certificate. See link:admin/install/index.html for details.

You may not trust the remote system’s CA

You may not trust the remote system’s CA

Verify that your system is configured to trust the remote CA (or that your environment is set up to trust the remote CA). See admin/install/index.html for details.

There may be something wrong with the remote service’s credentials

There may be something wrong with the remote service’s credentials

It is sometimes difficult to distinguish between errors reported by the remote service regarding your credentials and errors reported by the client interface regarding the remote service’s credentials. If you cannot find anything wrong with your credentials, check for the same conditions on the remote system (or ask a remote administrator to do so) .

Some tools to validate certificate setup

grid-cert-diagnostics

The grid-cert-diagnostics program checks prints diagnostics about the user’s certificates, and host security environment.

%  grid-cert-diagnostics -p
Check that the user certificate is valid
openssl verify -CApath /etc/grid-security/certificates
  -purpose sslclient ~/.globus/usercert.pem
Connect to the server using s_client
openssl s_client -ssl3 -cert ~/.globus/usercert.pem -key
  ~/.globus/userkey.pem -CApath /etc/grid-security/certificates
  -connect <host:port>

Here <host:port> denotes the server and port you connect to.

If it prints an error and puts you back at the command prompt, then it typically means that the server has closed the connection, i.e. that the server was not happy with the client’s certificate and verification. Check the SSL log on the server.

If the command "hangs" then it has actually opened a telnet style (but secure) socket, and you can "talk" to the server.

You should be able to scroll up and see the subject names of the server’s verification chain:

depth=2 /DC=net/DC=ES/O=ESnet/OU=Certificate Authorities/CN=ESnet Root CA 1
verify return:1
depth=1 /DC=org/DC=DOEGrids/OU=Certificate Authorities/CN=DOEGrids CA 1
verify return:1
depth=0 /DC=org/DC=doegrids/OU=Services/CN=wiggum.mcs.anl.gov
verify return:1

In this case, there were no errors. Errors would give you an extra line next to the subject name of the certificate that caused the error.

Check that the server certificate is valid

Requires root login on server:

    openssl verify -CApath /etc/grid-security/certificates -purpose sslserver
     /etc/grid-security/hostcert.pem

Grid map Troubleshooting

Grid map errors

The following are some common problems that may cause clients or servers to report that user are not authorized:

Table 3. Gridmap Errors
Error Code Definition Possible Solutions

The content of the grid map file does not conform to the expected format

The content of the grid map file does not conform to the expected format

Run grid-mapfile-check-consistency to make sure that your gridmap file conforms to the expected format.

The grid map file does not contain a entry for your DN

The grid map file does not contain a entry for your DN

Use grid-mapfile-add-entry to add the relevant entry.

Index